How To Install Window Blinds In Tampa

Many Tampa homeowners opt for window blinds when they want more privacy and management over natural light in their homes. They’re a useful and budget-friendly window treatment. They also require just a few steps to place for skilled do-it-yourselfers. However, nothing is more convenient than hiring an expert window treatment installer. Here are the basics of putting up window blinds and when you ought to contact the professionals to do it for you.

Get Measurements And Mark Everything Precisely

Prior to starting, figure out if you want inside-mount or outside-mount blinds. This vital detail will help you see where to measure. Measure the width, height, and depth within your frame for inside-mount blinds. When hanging outside-mount blinds, measure the height and width of your window, including the trim, and then increase your measurements by three inches to ensure adequate coverage. Measure exactly–avoid rounding up or down. Ill-fitting blinds will fail to function satisfactorily.

Choose Your Blinds

When you get your dimensions, you are ready to shop for blinds. You might already know what type of blinds you would like. Pick blinds that coincide with your measurements as closely as possible. Off-the-shelf blinds might not fit perfectly, either extending out too far or not getting to the window edge entirely. Make sure you are provided fasteners that let your blinds install at the appropriate depth, also. You’ll need to go with tailor-made blinds for a superior fit.

Install Your Window Blinds

Your blinds may have instructions. Use them to affix your specific product. If you wish to have a sample of how challenging it is to install window blinds in Tampa, here are several basic steps to give you a better idea.

 

Inside Mount Blinds

 

1. Affix a bracket at the top of the window’s frame about one inch from the outer edge. Make sure this positioning won’t obstruct the blind’s operation. Use a pencil to designate the bracket holes.
2. Drill pilot holes on your marks.
3. Line up the bracket where you drilled and drill in the screws.
4. Duplicate these initial three steps for the second bracket.
5. Snap the end caps onto the blind’s top rail. Slide the rail into the brackets.

Attach the tilt wand and try it out. Additionally, try out the pull cord.

Outside Mount Blinds

1. Determine if you’re mounting on the wall surrounding the window or the window trim. Hold up the headrail and ensure the blind covers the bottom edge of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark here for the screws.
4. Drill pilot holes as indicated.
5. Situate the bracket openings with the drilled holes and fasten with screws at each end.
6. Position the headrail into the brackets.

Attach the tilt wand and try out everything to ensure it works.

Pick The Simplest Way To Install Blinds 

Of course, you don’t need to put up blinds on your own. The easiest way to install window blinds in Tampa is to hire an expert window treatment installer. They will guide you every step of the way. They’ll help you select blinds that match your needs, make precise measurements for a made-to-order product, and install them for you. They do this every day, so they’ll handle your job quickly and correctly. They will troubleshoot any issues without taking hours looking for help on websites. A window treatment installer will also offer higher-quality blinds than large retail outlets or online marketplaces.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In Tampa

Getting new window blinds in Tampa couldn’t be easier when you work with Sunburst Shutters Tampa. We’ll help you find custom blinds that will match your windows precisely, and our skilled installation team will attach them for you. All you have to do is call 813-580-7288 or fill out the following form to schedule a no-cost in-home consultation.